Best Practice for maximising disk performance

I/O Readahead

It is recommended to increase the I/O readahead value for the volume to improve performance. This parameter determines the number of kilobytes that the kernel will read ahead during a sequential read operation.

The default value for this is 128KB but it is possible to increase this up to around 2048KB. This should drastically improve sequential read performance, and can be done using a script in /etc/udev/rules.d/.

Here is an example of what this script might look like.

$ sudo cat /etc/udev/rules.d/read-ahead-kb.rules
SUBSYSTEM=="block", KERNEL=="vd[a-z]" ACTION=="add|change",

This change is highly recommended if your workload is doing a lot of large streaming reads.

Striping Volumes and RAID0


The use of striped volumes is no longer considered to be a best practice approach to storage performance on the Catalyst Cloud.

In the past it was our opinion that the use of striping volumes to improve I/O performance was an acceptable approach when using the Catalyst Cloud. This is no longer the case, as there are several use cases where this has wide ranging impact in terms of overall storage performance.

If you do find yourself in the position of suffering due to demonstrable disk I/O performance then please raise a ticket with us through the Support Panel to discuss your requirements and we will assist in helping you resolve this.